| Version | Change log |
| DataExplorer 4.0.3 Mar 12, 2026 |
Generic changes/fixes: refine update check for latest release version fix device selection dialog resize problem (ARM 64) correct min/max time step value for min/max records referencing trigger refine font selection of record set description while key "Task" occurs Device specific changes/fixes: JetiAdapter - refined formatting of reverse channel statistics IGCAdapter - use mono space font if description contains triangle task analyze IGCAdapter - changed input stream reader encoding to UTF-8 General changes/corrections: Update check for latest release version refined Fixed a problem with resizing the device selection dialog (ARM 64) Min./Max. time step value corrected for Min./Max. data records relating to triggers. Font selection for data record descriptions when the "Task" key is pressed has been refined. Device-specific changes: JetiAdapter – Refinement of the formatting of return channel statistics IGCAdapter – Use of a monospace font when the description contains a triangular task analysis IGCAdapter – Changing the encoding of the input stream reader to UTF-8 |
| DataExplorer 4.0.2 Feb 11, 2026 |
Generic changes/fixes: Fix about dialog resize problem (ARM 64) Refine update check for newer release version Enable update check interval Device specific changes/fixes: LiPoWatch - fine tune dialog widget positions GPS-Logger2/3 - add IGC modus 'extended' GPS-Logger3 - add TEC compensation factor (FW 1.32) GPS-Logger3 - enhance record set description with TEC compensation factor and TEC pressure statistics GPS-Logger2/3 - correct sensor ID and instance ID setup for FrSKY |
| DataExplorer 4.0.1 Jan 19, 2026 |
Generic changes/fixes: Enable device selection with identical USB VID/PID without product string using libUSB Set location of USB HID selection dialog relative to main window Correct SWT upscaling on Windows with screen scaling above 175% Update swt.jar for Windows due to scaling behavior Device specific changes/fixes: MC3000* - change implementation to use libUSB instead of javax.USB MC3000* - enable S/N selection while more than one device connected |
| DataExplorer 4.0.0 Dec 15, 2025 |
Generic changes/fixes: Enable device selection with identical USB VID/PID without product string using libUSB Set location of USB HID selection dialog relative to main window Correct SWT upscaling on Windows with screen scaling above 175% Update swt.jar for Windows due to scaling behavior Device specific changes/fixes: MC3000* - change implementation to use libUSB instead of javax.USB MC3000* - enable S/N selection while more than one device connected |
| DataExplorer 3.9.9 Oct 14, 2025 |
Generic changes/fixes: enable correct SSL handshake for daily update check (manual update to this version required) Device specific changes/fixes: Core-Telemetrie - correct GPS coordinates handling, do not use transmitter coordinates anymore |
| DataExplorer 3.9.6 Jul 14, 2025 |
Generic changes/fixes update default grid color main graphics dark mode Device specific changes/fixes: HoTTAdapter* - update MDL viewer plug-in to versioon 1408 and add dark theme support Raytronic C60 - initial support GPS-Logger3 - add HoTT vario dead band switch IGCAdapter - add support for extensions defined by J record and values in K records of IGC OpenTx-Telemetrie - Ethos GPS-coordinates support (Latitude/Longitude without a unit, assume degree only) General changes/corrections: Default color of graphic guides adjusted Device-specific changes/corrections: HoTTAdapter* - Update of the MDL Viewer plug-in to version 1408, support for dark themes Raytronic C60 - initial support GPS-Logger3 - HoTT Vario dead zone switch added IGCAdapter - Support for extensions defined by J-records and values in K-records of IGC OpenTx Telemetry - Ethos GPS coordinates support (latitude/longitude without unit are taken as degrees) |
| DataExplorer 3.9.4 Apr 3, 2025 |
Add support for native USB communication Add support for SkyRC MC3000 single cell charger JetiAdapter - increase number of initial supported measurements to 50 ICharger - implemented checksum checking for serial communication JetiAdapter - add Rx->Tx time delta statistics (not differentiating over sensors) JetiAdapter - fix intermittent find best fit of time step which end up in less display points JetiAdapter - fix inconsistent detection of Speed record which leads to unusable color configuration while Google Earth KMZ export. HoTTAdapterX - HoTT V2 enable data visualization for external voltage and temperature Implement feature request to edit single cell in table Fix problem while measuring due to missing scale end value synchronization when scale synchronized measurement visibility toggled Fix problem while GPS coordinates are available, but speed record ordinal can not be identified Fix CSV export Time unit to [hh:mm:ss.SSS] Fix font size dialog while using high resolution Swt update to version 4.5 |
| DataExplorer 3.9.3 Nov 14, 2024 |
Generic changes/fixes: Fix Linux ARM download problem correcting naming, unless 3.9.2 is active workaround is manual downloading Handle unmappable characters while saving OSD file Fix zoom bounds end of data Update documentation Adapt settings dialog size for macOS Update USB device selection dialog to select USB device if multiple connected Enable usage of multiple USB devices in parallel while using product string and serial number to distinguish Device specific changes/fixes: HoTTAdapter* - *.log add generic radio warning field OpenTxTelemetry - fix "GPS clock" parsing MC3000* - suppress switching channel, while channel 5 is selected D200neo - initial implementation, due to USB chip to be used with Linux only Core-Telemetry - update documentation SkyRC devices - update curve selector only while required |
| DataExplorer 3.9.1 Aug 13, 2024 |
Generic changes/fixes: remove Java 8 support - attention using old 32 bit OS, latest supported stable version is 3.8.6! change update dialog text background update DevicePropertiesEditor launcher for Windows using bundled Java runtime allow usage of Java 21 without warning, ref. bug #65816 build using Java 21 and update build integrated runtime accordingly update device XSD to Version 49 and enable TCP socket communication enable simple JSON support in combination with TCP communication make serial port request editable using DevicePropertiesEditor update jSerialComm library to 2.11.0 final remove RxTxComm library since it does not support all supported execution platforms enhance junit test with JSON import Device specific changes/fixes: IGCAdapter - update to new start altitude 250m iCharger 4512DUO - update device selection picture OpenTx-Telemtry - update parsing algorithm to allow single empty values CSV2Serial* - fix "Line ending [bytes]" works only with <CR><LF>, ref. bug #65818 CSV2TCP1 - initial release supporting TCP socket communication with CSV respond JSON2TCP1 - initial release supporting TCP socket communication with JSON respond JSON2Serial2 - initial release supporting serial port communication with JSON respond AV4ms_FV_762 - refine data gathering 2TCP, 2Serial - refine getData recursion to eliminate secondary request |
| DataExplorer 3.9.0 Jul 15, 2024 |
Generic changes/fixes: Fix startup problem after clean new install <li class="bbli">Device specific changes/fixes: HoTTAdapter* - *.log reader, use block sequence number to track log time step PeakTech* - correct device XML names |
