| Version | Change log |
| TARGET 3001 33.9.0.10 Feb 5, 2026 |
Front panel properties added to the Settings / Options Front panels can be viewed in 3D in your Internet browser (Preview V34) Change Tracks dialogPolar coordinates can be used, ie, angle and length ODB++ export"Components" of the front panel are not included in the output CR/LF and tab characters are replaced by spaces in component values when loading, saving, and exporting Check "SMD pad with drill hole"A via in an SMD pad is allowed, if no solder paste is applied or the via is plugged Layer set buttons in the sidebar on the rightIf the active copper layer is not visible, a visible one is taken Changing one pin number of superimposed pins did not always change the summary of the numbers Insulation millingPolygonal pads were output a little bit too small Text tags in rotated rectangles were sometimes not printed |
| TARGET 3001 33.8.0.51 Jan 2, 2026 |
For IEEE components, the component ID "CMPID" may have been lost when saving A drill hole tolerance can be specified for every drill hole, for “Drilling Plan with Pictograms” (Preview V34) Create PDFs: Length of mirrored or rotated text differed sometimes Block diagram: New menu item: A different page can be assigned to a block DRC: Handling verbessert bei Abstandsprüfung gegen Bohrlöcher ohne Kupfer Texts dialog: Points (pt) can also be entered as font size (Preview V34) Texts dialog: Selected text can be converted to uppercase or lowercase letters |
| TARGET 3001 33.8.0.25 Oct 8, 2025 |
ODB++: Drill holes that belong to a package are no longer output as pads, if they have no copper left ODB++: Dotted and dashed lines are output accordingly Check project (ERC/DRC): Double-clicking a line in the error list also activates the marching ants |
| TARGET 3001 33.8.0.21 Oct 7, 2025 |
Capture coordinates with the [+] key: Solder pads only count if they are visible Message box when exceeding the pin/pad limit is displayed only once |
| TARGET 3001 33.4.0.7 Apr 11, 2025 | Sometimes signals could no longer be routed in a schematic and only a project reorganization helped |
| TARGET 3001 33.2.0.40 Dec 18, 2024 |
Pad with oblong hole: Very big oblong holes were not always drawn completely Pad dialog: Unit for oblong holes was not always displayed correctly Improvements when importing KiCAD package files *.kicad_mod Signal classes are also transferred via the clipboard and via modules, if available in the destination project |
| TARGET 3001 33.2.0.35 Dec 2, 2024 |
The edition "viewer" was not able to open several files if they contained 3D STEP models The creation of components with very many pins/pads (>200) failed sometimes Generate test points from a CSV in menu "Akcions / Check and Test / Test points / ICT adapter from CSV..." Isolation milling: SVG uses <polyline> instead of <line> for the outlines of tracks and pads Eagle library import: Texts of packages sometimes got the wrong layer Bill of Material (BoM): If the "USED_PACKAGE" property is empty or missing, the package name is output instead |
| TARGET 3001 33.2.0.9 Oct 29, 2024 |
TARGET 3001! V32 stands still, the current version is now V33 iBOM: The rotation of the components on top/bottom was not always correct Signal polygons (ground planes) have always pushed themselves into the foreground during selection with M1 DRC: The number of non-plated-through drill holes is displayed in the summary (if available) |
| TARGET 3001 32.8.0.21 Oct 25, 2024 |
Routing several tracks simultaneously with the Guided Bus Router (Preview V33) For all autorouters: Route layers are checked for route capability beforehand (copper) Settings / Options: Added DRC values to the topic "Project" |
| TARGET 3001 32.8.0.13 Oct 18, 2024 |
Component names and values to the handle..." places the name above and the value below the component center Fixed a sporadic problem when using the Element Inspector Preview messages can be disabled in the new "Settings" dialog completely |
